Tripp Lite UPS Smart 1000VA 800W Rackmount AVR 120V Preinstalled WEBCARDLX Pure Sine Wave USB DB9 SNMP 1URM, 1000 VA/800 W, 120 V AC, 4 Minute Stand-by Time, 1U Rack-mountable

SKU
INGM1R1390
$1,333.86 /EACH

Delivered in 2-4 business days

In stock
  • Pre-installed WEBCARDLX network interface.
  • 14 min. runtime at half load; 4 min. at full load.
  • Network power management and control capability.
  • 6 NEMA 5-15R outlets-2 switchable via network interface.
  • Corrects under- and overvoltages from 83V to 147V .

Protects Mission-Critical Rack-Mounted Equipment; Provides fully regulated sine wave AC output for servers, network storage devices and telecom hardware; Audible alarm signals loss of utility power, overload and low battery; 6 NEMA 5-15R outlets; 10-ft. (3.05 m) power cord with 120V NEMA 5-15P input; 450-joule surge suppression rating Reliable Battery Backup; Supports half load up to 14 min. and full load up to 4 min.; Internal batteries designed for hot-swap field replacement Pre-Installed WEBCARDLX Network Interface; Allows full remote access for power monitoring, configuration, control and email notifications via secure web browser, SNMP, Telnet, SSH, and CLI.; Optional E2 sensors (sold separately) enable site monitoring of temperature, humidity and contact-closure status Reduce Service Calls with Auto Probe Autonomous Device Management; Auto Probe feature (Firmware 15.5.2 and greater) of the LX Platform Interface checks the connectivity status of any networked device and automatically takes one or more user-configured actions if the device fails to respond; actions include outlet reboot, set SNMP traps, SNMP OID sets, and even script execution when used in conjunction with the Tripp Lite PowerAlert Network Shutdown Agent (PANSA) Switchable Outlets; 2 load banks, each with one outlet controllable remotely to reboot equipment or shed nonessential loads. Automatic Voltage Regulation (AVR); Maintains 120V nominal output over input range of 83V-147V without using battery power. EMI/RFI Line Noise Filtering; Removes electromagnetic and radio frequency interference that can disrupt or damage equipment's performance. LED Indicators; Front-panel LEDs signal power, voltage correction, load level and battery charge state. Communications Ports; USB and DB9 ports enable data-saving unattended shutdown when used with Tripp Lite's PowerAlert software (available via free download at www.tripplite.com/poweralert); EPO port supports emergency shutdown in large facilities. Versatile Installation Options; Hardware included for mounting in 1U of EIA-standard 19 in. 2- or 4-post rack; Optional 4POSTRAILKIT1U accessory available for extra support in 4-post installations; Compatible with vertical mount cabinets


Backup/Run Time (Full Load)4 Minute
Brand NameTripp Lite
Country of OriginChina
Depth16.8"
Environmental CertificationRoHS
Environmentally FriendlyYes
Form FactorRack-mountable
Height1.7"
Input Voltage120 V AC
Load Capacity (VA)1000 VA
Load Capacity (W)800 W
Manufacturer Part NumberSMART1000RM1UN
ManufacturerTripp Lite by Eaton
Output Voltage120 V AC
Package ContentsSmartPro SMART1000RM1UN 1kVA Rack-mountable; Mounting Hardware; Cabling for USB & DB9 Monitoring and EPO Switching; PowerAlert Unattended Shutdown and UPS/Power Monitoring Software; Instruction Manual
Product FamilySmartPro
Product LineSmartPro
Product ModelSMART1000RM1UN
Product NameSmartPro SMART1000RM1UN 1kVA Rack-mountable
Product TypeLine-interactive UPS
Rack Height1U
Receptacle Detail6 x NEMA 5-15R
Receptacle TypeNEMA 5-15R
TAA CompliantYes
Weight (Approximate)32 lb
Width17.5"
Download PDF File
BrandTripp Lite
Weight (lbs)35.4000
UPC0037332190741
MPNSMART1000RM1UN
Your Rating