3/4x1/2x1/2 Pex Tee

SKU
TRUE228986
$16.50 /EACH

Delivered in 2-4 business days

In stock
  • Made from lead-free DZR ecobrass
  • Connects to PEX pipe with copper crimp rings or stainless steel clamps
  • Minimum working temperature 33 deg F at 160 psi and maximum working temperature 200 deg F at 80 psi
  • For potable water, hydronic heating system and radiant heating applications

3-3/4" x 1/2" x 1/2", Brass, Lead Free Pex Barb Insert Tee, Makes A 1/2" Branch From A 3/4" Run Of Cross Link Polyethylene Pex Tubing, To Secure The 1/2" Barb End Of Fitting To 1/2" Pex Pipe May Use With TV# 608933 Cinch Clamps & TV# 608743 Cinch Tool, Or Copper Crimp Rings & Crimp Tool, Secure 3/4" Barb End Of Fitting To 3/4" Pex Pipe With TV# 608826 Cinch Clamps & TV# 608743 Cinch Tool, Or Copper Crimp Rings & Crimp Tool, Not Included, Immediately Testable To Well Over 100 PSI, Meets The New NSF/ANSI Standard 14-2009 & ASTM F 1807-9SI Standard For Products Intended For The Transport Of Potable Water, ANSI/NSF Standard 61 Annex G For Lead Free Compliance & The Wetted Surface Of This Product Contacted By Consumable Water Contains Less Than 0.25% Of Lead By Weight To Meet AB1953 California & VT S152 Vermont Low Lead Restrictions.


ANSI CertifiedYes
Average Lead ContentLead-Free
Brand NameSharkBite
End 1 Diameter3/4
End 1 TypePEX
End 2 Diameter1/2
End 2 TypePEX
End 3 Diameter1/2
End 3 TypePEX
MaterialBrass
Maximum Pressure160
Maximum Temperature200
Number in Package1
Packaging TypeBagged
Product TypeReducing Tee
Push to ConnectNo
Download PDF File
UPC697285605220
Weight (lbs)0.1200
Prop65 WarningThis product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov
MPNUC454LFA
BrandSHARKBITE
Your Rating