Betco Emulsion Pro Plus Sport Sealer & Finish, F-Style, 1 Gallon Bottle, Pack of 4

Emulsion pro+ is a one-component, ambering, commercial grade, self-levelling sealer & finish. this product contains an oxidative crosslinking polyurethane (ocp), and is ideal for use in residential, commercial, or sport wood flooring applications. features one-component, extended pot life ambering, enhances beauty of wood low voc, low odor is not omu non-flammable voc compliant, compliant in us & canada for use on gymnasium and other wood floors directions for use wood floor preparation vacuum all dust and tack with cotton towel. sealer application 2 coats minimum recommended. apply at 500 - 600 sq. ft./gal. 120 grit screens are recommended for final screening for screening and recoating always clean the floor prior to screening. mix squeaky cleaner (see product label for additional instructions) and tack using a clean towel. screen using new 120 or 150 grit screens, vacuum and tack using a water moistened cotton towel application apply at 600 sq.ft./gal. pour finish into a clean, dry, plastic pour can. pour a 4-inch wide line of finish along one wall, with the grain of the wood. with the applicator at a slight angle, move the puddle line to the opposite wall, always maintaining a wet edge. at the end of each pass, make a smooth turn with the applicator and squeeze out excess finish with the grain next to the puddle line. allow to dry thoroughly (minimum 2 - 3 hours between coats depending on conditions with a maximum of 24 hours). abrade between coats if 24 hours has elapsed with a maroon top scrub pad or 150 grit screen. apply 1 - 2 coats minimum. allow light traffic after 24 hours, however, it is susceptible to scuffing and marring note allow adequate ventilation. circulate air above the floor. allow adequate airflow for at least 24 hours after final coat is applied. use air conditioners and exhaust fans where available.