Portable Eye Wash, 16 in, 15 gal

SKU
ORS333G1562
$1,635.35 /EACH

Delivered in 2-4 business days

In stock
  • Self-contained eye wash and drench hose units are ideal where a continuous supply of potable water is not available.
  • Tank has built-in carrying handles, air intake fitting, pressure gauge and pressure relief valve.
  • Eye Wash Unit: two GS-Plus spray heads, each with a “flip top” dust cover, internal flow control and filter, valve is 1/2” IPS chrome plated brass stay-open ball valve with flag handle.
  • Drench Hose: single GS-Plus spray head with “flip top” dust cover, internal flow control and filter, valve is chrome plated brass squeeze valve with stainless steel lever handle.

Portable eyewash and drench hose unit g1562 application self-contained eyewash and/or drench hose units are ideal where a continuous supply of potable water is not available. these units may be used in low traffic areas, where installation of plumbed equipment is not cost effective. fifteen gallon units provide approximately 10 usable gallons (37.9 liters) of water for effective rinsing of the eyes, face or body. note that, under ansi z358.1-2014, drench hose units supplement but do not replace other types of emergency equipment. tank 15 gallon stainless steel pressurized tank. tank has built-in carrying handles, schrader air intake valve, pressure gauge and pressure relief valve. tank has approximately 10 gallons (37.9 liters) usable capacity. eyewash unit two gs-plus spray heads, each with a "flip top" dust cover, internal flow control and filter. 1/2" ips chrome plated brass stay-open ball valve with flag handle. pressure regulator controls eyewash flow to 0.65 gpm for 15 minutes. drench hose single gs-plus spray head with "flip top" dust cover, internal flow control and filter. chrome plated brass squeeze valve with stainless steel lever handle and 6 ft. reinforced pvc hose. operation to operate unit, fill with clean potable water and add bacteriostatic additive (supplied with unit). additive protects against growth of bacteria, fungus, algae and acanthamoeba inside unit. after filling with water, pressurize unit to 80 psi air pressure. if necessary, adjust pressure regulator to achieve maximum flow for fifteen minutes. unit should be inspected regularly and water in unit should be changed at least once every six months. filling instructions included. weight 35.6 lbs. empty, 118.9 lbs. filled. quality assurance unit is completely assembled, pressurized and water tested prior to shipment. sign ansi compliant identification sign permanently affixed to tank. quality assurance unit is fully assembled, pressurized and water tested at t

BrandGuardian
Weight (lbs)44.1000
UPC013535119215
MPNG1562
Prop65 WarningThis product can expose you to chromium, nickel, lead, & phthalates, a chemical known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
Your Rating