Tp Link TP-Link TL-SG1210MP, 10-Port Gigabit Desktop Switch with 8-Port PoE+, Limited Lifetime Protection, 8 Port Gigabit PoE Switch, 8 PoE+ Ports @123W

Highlights- With eight PoE+ ports, transfers data and power on one single cable - Working with IEEE 802.3af/at compliant PDs, expands your network - Supports PoE power up to 30 W for each PoE port - Supports PoE power up to 123 W for all PoE ports - Up to 250 m data and power transmission under Extend Mode specially designed for surveillance system - Priority Mode ensures high priority of port 1-2 to guarantee the quality of sensitive application - Isolation Mode allows one-click client traffic separation for higher security and performance - With PoE Auto Recovery, the switch will automatically reboot your dropped or unresponsive PoE-powered devices connected to port 1-8 - Requires no configuration and installation - Fanless Design - Supports desktop and wall mountable installation methodsOverview TL-SG1210MP is an unmanaged switch with 10 Gigabit ports that requires no configuration and provides 8 PoE (Power over Ethernet) ports. It can automatically detect and supply power with all IEEE 802.3af/at compliant Powered Devices (PDs). In this situation, the electrical power is transmitted along with data in one single cable allowing you to expand your network to where there are no power lines or outlets, where you wish to fix devices such as APs, IP Cameras or IP Phones, etc.Power Over Ethernet8 RJ45 ports (port 1 to port 8) of the switch support Power over Ethernet (PoE) function. These PoE ports can automatically detect and supply power with those IEEE 802.3af/at compliant Powered Devices (PDs).Overload ArrangementTL-SG1210MP has the priority function which will help protect the system when the system power is overloaded. If all PoE PDs power consumption is 123 W, a priority will be arranged among the PoE ports, then the system will cut off the power of the lowest-priority port.Intelligent Power ManagementPriority (port 1 > port 2 > port 3>... > port 8): This function will help protect the system when the system power is overloaded. For example, port 1, 2, 3 and 5 is using 25 W respectively (maximum power per port is 30 W); the system power is 100 W in total. If there is an additional PD inserted to port 4 with 30 W, and then the system will cut off the power of port 5 because of the overloaded power, this means port 1, 2, 3 will use 25 W respectively and port 4 will use 30 W, no power will be supplied to port 5.