Tripp Lite Gigabit Multimode Fiber to Ethernet Media Converter, 10/100/1000 LC, International Power Supply, 850 nm, 550M (1804.46 ft.), 1 x Network (RJ-45), 1 x LC Ports, DuplexLC Port, Multi-mode

The economical N785-INT-LC-MM Gigabit Multimode Fiber to Ethernet Media Converter allows you to extend your 10/100/1000 Mbps Ethernet connection up to 550 meters (1,804 feet) without the limitations of extra Cat5e/6 UTP cabling. Because Cat5e/6 cables are limited to only 100 meters, it is more effective to use LC multimode fiber optic cabling for greater distances.Use copper UTP cabling to connect one 850 nm N785-INT-LC-MM converter to your network device, such as a computer, and another converter to a network switch. The two converters are connected by a multimode fiber optic cable with LC connectors. The N785-INT-LC-MM supports 50/125 multimode cable up to 550 meters and 62.5/125 multimode cable up to 400 meters.Monitoring and controlling your network nodes is easy with the converter's advanced features, such as automatic network speed sensing, full/half-duplex auto-detection and automatic MDI/MDI-X configuration. Six LEDs indicate the converter's Ethernet network and fiber link status at a glance. The N785-INT-LC-MM includes an external power supply with international plug adapters for North America (NEMA 5-15P), the United Kingdom (BS 1363), Europe (CEE 7/16 Schuko) and Australia (AS/NZS 3112). The plug-and-play fiber-to-copper media converter requires no software or drivers and is easy to set up. Features. Extends a Gigabit Ethernet Signal up to 550 m (1,804 ft.) Using LC Multimode Cable; Converts UTP copper connection to duplex fiber over long distance, then back to copper at opposite end while auto-sensing the proper speed; Fiber optic technology more effective than Cat5e/6 over long distances; Supports 50/125 multimode fiber optic cabling up to 550 m; Supports 62.5/125 multimode fiber optic cabling up to 400 m; Connection requires an N785-INT-LC-MM at both ends. Advanced Monitoring and Control; Supports automatic sensing of network speed; Supports both full-duplex and half-duplex operation; Supports automatic MDI/MDI-X configuration; 6 LEDs indicate network and fiber link status at a glance. Plug-and-Play Operation; No additional software or drivers required; Compact unit sets up in minutes; Durable metal housing designed to last; Power supply includes international plug adapters for North America, U.K., Europe and Australia