Tripp Lite UPS Smart 1000VA 800W Rackmount AVR 120V Pure Sine Wave USB DB9 SNMP 1URM, 1U Rack-mountable, 4.50 Hour Recharge, 4 Minute Stand-by, 120 V AC Input

Protects Mission-Critical Rack-Mounted Equipment; Provides fully regulated sine wave AC output for servers, network storage devices and telecom hardware; Audible alarm signals loss of utility power, overload and low battery; 6 NEMA 5-15R outlets; 10 t. (3.1 m) power cord with 120V NEMA 5-15P input; 450-joule surge suppression rating Reliable Battery Backup; Supports half load up to 14 min. and full load up to 4 min.; Internal batteries designed for hot-swap field replacement Switchable Outlets; 2 load banks, each with one outlet individually controllable via software interface to reboot equipment or shed nonessential loads Automatic Voltage Regulation (AVR); Maintains 120V nominal output over input range of 83V-147V without using battery power EMI/RFI Line Noise Filtering; Removes electromagnetic and radio frequency interference that can disrupt or damage equipment's performance High Efficiency Operation; 99% line mode efficiency saves money, energy and protects the environment Network Management Cards; Compatible with Tripp Lite UPS management card options TLNETCARD, WEBCARDLX and SNMPWEBCARD Communications Ports; USB and DB9 ports combine with PowerAlert software (available via free download from www.tripplite.com/poweralert) to monitor operating conditions, monitor AC power, and enable safe unattended system shutdown and file saves in case of a prolonged power failure; EPO port supports emergency shutdown in large facilities Versatile Installation Options; Hardware included for mounting in 1U of EIA-standard 19 in. 2- or 4-post rack; Optional 4POSTRAILKIT1U accessory available for extra support in 4-post installations; Compatible with vertical mount cabinets